Yamaha DM 2000 Owner's Manual page 288

274
Appendix A: Parameter Lists
AMP SIMULATE
One input, two output guitar amp simulator.
Parameter
AMP TYPE
DST TYPE
DRIVE
MASTER
BASS
MIDDLE
TREBLE
CAB DEP
EQ F
EQ G
EQ Q
N. GATE
1. STK-M1, STK-M2, THRASH, MIDBST, CMB-PG, CMB-VR, CMB-DX, CMB-TW, MINI, FLAT
DYNA. FILTER
Two input, two output dynamically controlled filter.
Parameter
SOURCE
SENSE
DIR.
DECAY
TYPE
OFFSET
RESO.
LEVEL
1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz), 3 ms–23.0 s (fs=88.2 kHz), 3 ms–21.1 s
(fs=96 kHz)
DM2000—Owner's Manual
Range Description
1
Guitar amp simulation type
DST1, DST2, OVD1,
Distortion type (DST = distortion, OVD = overdrive)
OVD2, CRUNCH
0–100 Distortion drive
0–100 Master volume
0–100 Bass tone control
0–100 Middle tone control
0–100 High tone control
0–100% Speaker cabinet simulation depth
100 Hz–8.0 kHz EQ (peaking type) frequency
–12 to +12 dB EQ (peaking type) gain
10.0–0.10 EQ (peaking type) bandwidth
0–20 Noise reduction
Range Description
INPUT, MIDI Control source: input signal or MIDI Note On velocity
0–100 Sensitivity
UP, DOWN Upward or downward frequency change
1
Filter frequency change decay speed
LPF, HPF, BPF Filter type
0–100 Filter frequency offset
0–20 Filter resonance
0–100 Output Level