Sending Input Channels To Aux Sends - Yamaha DM 2000 Owner's Manual

80
Chapter 7—Input Channels
DEPTH OFFSET: This can be used to offset the front-to-rear direction of the selected pat-
tern.
ST LINK: This can be used to link the surround pan parameters of the currently selected
Input Channel and its horizontal or vertical partner regardless of whether they are paired.
PATTERN: When Input Channels are linked, the seven patterns selectable here determine
how the linked surround pan moves by the Parameter wheel and INC/DEC buttons.
Input Channel Surround Pages
Surround pan positions can be viewed and set on the Surround pages.
1 Use the SELECTED CHANNEL PAN/SURROUND [DISPLAY] button to select
the Input Channel Surround pages.
The Surround parameters for the 96 Input Channels are arranged into four pages. The
Input Channel 1–24 Surround page is shown below. The layout of the other three pages is
the same.
Use the cursor buttons to select the Surround parameters, and use the
2
Parameter wheel and INC/DEC buttons to set them.
Input Channels can also be selected by using the Input Channel Layer buttons and [SEL]
buttons. The graph for the currently selected Input Channel displays a small square, which
indicates the current position of the Joystick.
L/R: These parameters are used to set the left/right surround position. While selected, they
can quickly be set to center by pressing [ENTER].
F/R: These parameters are used to set the front/rear surround position. While selected, they
can quickly be set to center by pressing [ENTER].
You can jump to the more detailed Surround Edit page by pressing [ENTER] while an Input
Channel's surround graph is selected.

Sending Input Channels to Aux Sends

Input Channel signals can be sent to Aux Sends 1–12. See "Setting Aux Send Levels" on
page 89, "Muting Aux Sends (ON/OFF)" on page 90, and "Pre-Fader or Post-Fader Aux
Sends" on page 88.
DM2000—Owner's Manual