Panning Matrix Sends; Viewing Matrix Send Settings - Yamaha DM 2000 Owner's Manual

Panning Matrix Sends

Matrix Sends can be panned on the Matrix Send Pan page. The Matrix Sends for the left and
right channels of the Stereo Out can be panned individually.
Use the MATRIX SELECT [DISPLAY] button to select the Matrix Send Pan
1
page.
2 Use the MATRIX SELECT [1–4] buttons to select Matrix Sends 1–4.
Use the cursor buttons to select Output Channel Matrix Send pan controls,
3
and use the Parameter wheel or INC/DEC buttons to set them.
If the Master Layer is currently selected, [SEL] buttons 1–20 can also be used to select Out-
put Channels.
The currently selected Pan control can quickly be set to center by pressing [ENTER].

Viewing Matrix Send Settings

You can view and set the Matrix Send Level and On/Off parameters of all Matrix Sends on
the Matrix View page. If the Auto AUX/MATRIX Display preference is on, and a Bus Out,
Aux Send, or the Stereo Out is currently selected, this page appears automatically when a
SELECTED CHANNEL AUX/MATRIX SEND control is operated. See "Auto
AUX/MATRIX Display" on page 234 for more information.
Use the MATRIX SELECT [DISPLAY] button to select the Matrix Send View
1
page.
2 Use the cursor buttons to select the PRE FADER and POST FADER buttons,
and press [ENTER] to set all Matrix Sends to either pre-fader or post-fader.
Use the cursor buttons to select the Output Channel Matrix Sends.
3
Panning Matrix Sends
DM2000—Owner's Manual
99