Yamaha DM 2000 Owner's Manual page 194

180
Chapter 17—Automix
Event Edit Page
On the Event Edit page, you can edit, duplicate, delete, and insert new events.
1 Use the AUTOMIX [DISPLAY] button to locate the Event Edit page.
Use the cursor buttons to select the parameters, and use the Parameter
2
wheel, INC/DEC buttons, and [ENTER] button to set them.
Event list: Automix events are listed in chronological order. The type of events listed
depends on the Event select buttons. Use the cursor buttons to select event parameters.
While the cursor is on the DUPLICATE, DELETE, SELECTED CH, Event select, or SYNC
buttons, you can use the Parameter wheel or the INC/DEC buttons to scroll the list. While
the cursor is inside the event list, you can use these controls to edit event parameters. The
triangular cursor at the left side of the list indicates the currently selected event. When an
event's timecode value is edited, the list is resorted automatically.
DUPLICATE button: This button is used to duplicate events. Use the Parameter wheel to
select an event, select the DUPLICATE button, and then press [ENTER]. A duplicate event
is inserted below the currently selected event. If there are no events in the list, you can use
this button to insert a new event of the type specified by the Event select buttons.
DELETE button: This button is used to delete events. Use the Parameter wheel to select
an event, select the DELETE button, and then press [ENTER].
SELECTED CH: When this option is on, only events of the currently selected channel are
displayed. All Scene recall and effects library recall events are displayed regardless of this
option. For paired channels, only events of the currently selected channel are displayed.
Event select buttons: These buttons are used to select the type of events to be displayed
in the event list.
Button
SCENE/LIB
FADER
ON
PAN
SURR
AUX
AUX ON
SYNC button: This button is used to synchronize the list to the current timecode posi-
tion. When pressed, events closest to the current timecode position are displayed. This
function can be used during Automix playback.
Timecode counter: This counter displays the current timecode position.
DM2000—Owner's Manual
Events Listed
Library and Scene recall events
Channel faders (Inputs Channels, Bus Out masters,
Aux Send masters, Matrix Send masters, and the Ste-
reo Out)
Channel Mutes (ON/OFF)
Pan
Surround pan
Aux/matrix Send 1–12 levels
Aux/matrix Send 1–12 mutes
List Format
TIME CODE, CH, SCENE/LIB
TIME CODE, CH, dB, SEC
TIME CODE, CH, ON/OFF
TIME CODE, CH, L-C-R
TIME CODE, CH, SURR
TIME CODE, CH, AUX, dB
TIME CODE, CH, AUX, ON/OFF