Yamaha DM 2000 Owner's Manual page 209

Control Surface Operation with the Pro Tools Remote Layer
[ASSIGN 1] (INPUT) button
This button is used in conjunction with other controls to set channel input sources. See
"Assigning Inputs to Channels" on page 203 for more information.
[ASSIGN 2] (OUTPUT) button
This button is used in conjunction with other controls to set channel output destinations.
See "Assigning Outputs to Channels" on page 204 for more information.
[ASSIGN 3] (SEND ASSIGN) button
This button is used in conjunction with other controls to set send destinations. See "Assign-
ing Send Destinations" on page 206 for more information.
[ASSIGN 4] (INSERT) button
This button determines the operation of the [SEL] buttons. When its indicator is off, [SEL]
buttons select channels (see page 203). When its indicator is on, they select inserts/plug-ins
(see page 210).
FADER MODE Section
[FADER] & [AUX/MTRX] buttons
These buttons are used to select Flip mode, in which faders, Encoders, and [ON] buttons
can be used to control sends. See "Flip Mode" on page 208 for more information.
DISPLAY ACCESS Section
[METER] button
This button is used to reset the meter clip indicators and peak hold indicators.
FADER MODE
FADER AUX/MTRX
DISPLAY ACCESS
METER
195
DM2000—Owner's Manual