Configuring Fluorescent Data (F-Panel For Ymcfk Ribbon) - HID HDP5000 User Manual

HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
8.2

Configuring Fluorescent Data (F-Panel for YMCFK Ribbon)

This process creates a fluorescent image on your card using a simple text string command in
your badge application.
Step Procedure
Creating Fluorescent Text. Create a new text box in your
1
badge application.
Type the TEXT that you want to appear as fluorescent and put
2
a ~T before the start of the text with no space after the ~T. The
text will start on the card where the ~T begins.
3 Creating a Fluorescent Image. In a separate drawing
program, create the image you wish to fluoresce.
4 Create the IMAGE in the actual size that you want it to appear
on the card, and save it as a Grayscale or 1 - bit bmp file on
the root c:\ directory. Do not put spaces in the file name.
5 Create a new text box in your badge application, and type ~I
followed by the address of your image (see Step 2).
The top left of your image will start at the top left of your text
box.
6 Set up the printer driver preferences. Refer Steps 8-10.
July 2013
© 2012, 2013 HID Global Corporation. All rights reserved.
Card - Badge Application
BMP Image located at
c:\globe.bmp
Page 89 of 101