Scan to USB
Procedure
1.
Insert a USB drive into the USB port on the left side of the operator panel.
2.
Place the originals face up into the ADF, or place 1 original face down on the glass plate.
3.
Touch [Jobs] -> [Copy/Scan] -> [Scan to USB].
The job window opens.
4.
Change the settings for the original and the file.
5.
Touch [Job name] to change the default job name.
Use the keyboard to change the name, then touch [OK].
6.
Touch [Destination] to indicate the folder on your USB drive where you want to save the file.
7.
If applicable, enter the [Account ID].
8.
Touch [Start]
The scanner scans the originals. The system sends the resulting file to your USB drive.
9.
Touch
to eject the USB drive.
10.
Remove the USB drive from the operator panel when the message [USB drive has been
successfully ejected.] is displayed.
.
Chapter 10 - Carry out scan jobs
Scan to USB
279