Manage Variable Data Printing (Vdp Jobs) - Canon IMAGEPRESS C7011VPS SERIES Operation Manual

Manage variable data printing (VDP jobs)

Introduction
When a VDP job is sent to a queue, an additional [Records] column appears with the icon in the
figure below. Change the job settings of a VDP job just like any other print job, except for optional
page programming functions. Note that a job setting applies to every record. For example, staple
does not staple the whole job; it staples every record.
[55] VDP job icon
NOTE
To make proof prints, send a VDP job to the list of [Waiting jobs] or the [DocBox].
Procedure
1.
Touch [Jobs] -> [Queues] -> [Waiting jobs].
2.
Touch [Properties] or double-touch the print job to display the job properties.
3.
Check and change the job properties, if required.
4.
Press [OK].
5. If you want to print a range of records, touch [Print range] to set the range.
6. If you want to make a proof print, touch [Proof] to print the first record.
The first record of the print job is copied as a print job to the bottom of the list of [Scheduled
jobs].
7.
If the proof is OK, touch [Print] to print all the records.
The job is moved to the bottom of the list of [Scheduled jobs].
NOTE
You can stop the active print job
When you press the stop button
printer buffer is empty.
When you press the stop button
when the printer buffer is empty.
using the stop button
once, the printer stops immediately after a record when the
twice, the printer stops as soon as possible after a record
Manage variable data printing (VDP jobs)
Chapter 8 - Carry out print jobs 181