Canon IMAGEPRESS C7011VPS SERIES Operation Manual page 35

NOTE
• If the finishing is used, the output trays move downward as the stack of paper that is output
increases in quantity and thickness. Once an output tray has reached its stacking limit,
subsequent prints are automatically delivered to the next available tray. If all of the available
trays have reached their stacking limits, printing stops temporarily. Remove all of the output
paper from the trays. The trays move upward and printing resumes.
• If the optional Booklet Trimmer-D1 is attached to the Saddle Finisher-AJ2, you cannot output
stapled paper to the upper tray.
CAUTION
Do not place your hands in the part of the tray where stapling is performed (near the rollers)
when a finisher is attached, as this may result in personal injury.
• Stapling
IMPORTANT
• During stapling, the output trays move downward as the stack of paper that is output
increases in quantity and thickness. Once an output tray has reached its stacking limit, or after
100 sets of prints have been output, printing and stapling stop temporarily. Remove all of the
stapled prints from the output tray, and printing and stapling resume.
• You can corner and double staple A3, B4, A4, A4R, and B5 paper.
• You can corner and double staple 11" x 17", LGL, LTR, LTRR and EXEC paper.
• You cannot staple vellums, transparencies, or labels.
• Do not pull copies or prints out of the output area while they are being stapled. Remove the
copies or prints after they are output to one of the output trays.
The stacker/stapler, optional inserter and optional integrated punch unit
Chapter 2 - Main parts 35