Find the meter readings (counters)
Introduction
The [Printer] section of the [System] view displays 2 types of counters.
• The billing counters provide information about the number of sheets that have been printed
since the printer was installed. You cannot reset the billing counters.
• The day counters provide information about the number of prints since the last reset. You do
not need the day counters for the meter reading. The day counters are only intended for your
own convenience.
This section describes how to find the counters.
Procedure
1.
On the operator panel, press the [System] button.
2.
Press [Maintenance].
You can find the required meter readings at the left-hand side of the screen.
Find the meter readings (counters)
Chapter 14 - Maintenance and print quality
351
Need help?
Do you have a question about the IMAGEPRESS C7011VPS SERIES and is the answer not in the manual?