Canon IMAGEPRESS C7011VPS SERIES Operation Manual page 153

NOTE
Make sure that the punch waste tray is completely emptied.
4. Return the punch waste tray to its original position.
Make sure to insert the punch waste tray as far as it can go.
NOTE
If the punch waste tray is not securely in place, you cannot make copies or prints in the Hole
Punch mode.
5.
Close the front cover of the finisher.
CAUTION
When closing the front cover of the finisher, be careful not to get your fingers caught, as this
may result in personal injury.
Removing the punch waste
Chapter 7 - Media handling 153