Select A Different Media For A Job - Canon IMAGEPRESS C7011VPS SERIES Operation Manual

Select a different media for a job

Select a different media for a job
Introduction
If you want to print a job on other media than originally defined for that job, you can select a
different media via the operator panel. You can select another media of the same size at the
Preview pane. You can select another media with a different size from the [Output] pane.
NOTE
The media must be available in the media catalog.
Procedure
1. Touch [Jobs] -> [Waiting jobs], or select a [DocBox].
2.
Touch the job you want to change.
NOTE
You can only change the settings of the active print job
[Stop] button
3. Touch [Properties], or touch the job twice to open the [Properties] window.
4. In the preview pane at the right-hand side, touch the media you want to change.
When more than 1 media was defined for a job, the preview pane displays a separate button for
each media.
5.
From the list, select the new media.
6.
Press [OK].
7.
Press [OK].
192 Chapter 8 - Carry out print jobs
two times).
after you stopped the printer (press the