Density Not Within Required Range Message - Canon IMAGEPRESS C7011VPS SERIES Operation Manual
Hide thumbs
Also See for IMAGEPRESS C7011VPS SERIES:
- Operation manual (391 pages) ,
- Service manual (121 pages)
Table of Contents
Advertisement
Density not within required range message
Introduction
In exceptional cases, the [Shading correction] procedure fails with a 'Density not within required
range' message. In that case, follow the next procedure.
Procedure
1.
At [System] -> [Color adjustment] -> [Printer calibration details]:
1.
Select [Auto gradation adjustment].
2.
Deselect [Shading correction].
2.
Touch [Start printer calibration].
3.
Follow the instructions on the operator panel.
4.
Select [Automatic (internal sensor)] in the [Calibration method] window.
5.
At [System] -> [Color adjustment] -> [Printer calibration details].
1.
Select [Auto gradation adjustment].
2.
Select [Shading correction].
6.
Follow the instructions on the operator panel.
7.
Select [Automatic (internal sensor)] in the [Calibration method] window.
After you finish
If the [Shading correction] procedure still fails, contact your local service representative.
Density not within required range message
Chapter 14 - Maintenance and print quality
359
Advertisement
Table of Contents
