Maintenance And Counters; Introduction To The Maintenance Section - Canon IMAGEPRESS C7011VPS SERIES Operation Manual

Maintenance and counters

Maintenance and counters
Introduction to the [Maintenance] section
Introduction
The maintenance section consists of the following two subsections.
• [Maintenance].
• [Counters]
In the maintenance subsection, you can:
• Access maintenance procedures
• Enter the service mode
• Allow remote service (optional)
The counters subsection displays the following counters.
• [Billing counters]
The [Billing counters] section displays the total number of prints that have been made since
the machine was installed. Which counters there are visible depends on the region. You cannot
reset the billing counters.
• [Day counters]
The [Day counters] section displays the number of prints that have been made since the
counter was last reset to 0. You can, for example, reset the day counters at the beginning of a
working day or before you start a new job for a particular customer.
342 Chapter 14 - Maintenance and print quality