Canon IMAGEPRESS C7011VPS SERIES Operation Manual page 29

Component
4 USB port
5 [Schedule] button
6 [Jobs] button
7 [Trays] button
8 [System] button
9 Dashboard
Function
Use the USB port to:
• Connect the spectrophotometer and calibrate the
printer and controller.
• Print a file from an USB drive
• Scan to a USB drive
Access the [Schedule] view to manage the jobs in
the schedule.
Access all functions to print, copy and scan your
documents.
• Manage or change the settings for jobs in the
[Waiting jobs], [Scheduled jobs] and [Printed
jobs] lists, or in a [DocBox] (optional).
• Carry out copy jobs and scan jobs.
Access the [Trays] view on the operator panel to do
the following, for example:
• Check the content of all paper trays.
• Load a new media type into a paper tray, or
• Change the media type which is available in one
of the paper trays.
Access [System] view to do the following, for exam-
ple:
• Check the status of the toner, staples and other
supplies.
• Read the counters.
• Start maintenance.
• Set up the preferred workflows.
• Change a number of default system settings.
• Adjust the brightness and contrast of the LCD
panel.
• View the content of the Media catalog or add
temporary media to the Media catalog.
• Start maintenance, calibration and media regis-
tration
• Shut down the printer.
The dashboard displays information about the sys-
tem status such as:
• Information about the current printing process.
• Information about operator intervention that is
required soon.
• Information about errors.
• Information about the status of the toner reser-
voir and staple cartridges.
• Continue the job when the status is [On hold].
The operator panel
Chapter 2 - Main parts
4
29