Create A Hotfolder - Canon IMAGEPRESS C7011VPS SERIES Operation Manual

Create a hotfolder

Introduction
The information in this section is intended for system administrators.
Before you begin
The hotfolder function must be activated once by the system administrator.
Procedure
1.
Open your web browser and enter the host name or IP address of your PRISMAsync controller.
2.
Go to the [Workflow] -> [Hotfolders] section.
3.
Click [Add].
4.
Give the hotfolder a logical name.
5.
Select the workflow folder to which you want to link.
6.
Click [OK].
Create a hotfolder
Chapter 8 - Carry out print jobs 205