Canon IMAGEPRESS C7011VPS SERIES Operation Manual page 89

Group of settings
[Connectivity]
[System settings]
Procedure
1.
Touch [System] -> [Setup] -> [Local key operator settings] (below [Advanced]).
2. Touch the button of the group that contains the setting you want to change or view.
3. Touch the required setting.
4.
Look up the required information or make the required changes.
5.
Press [OK].
Available settings
• [MAC address]
(read-only)
• [Host name]
• [Link speed and
connection type]
• [DHCP enabled]
• [TCP/IP address]
• [Subnet mask]
• [Default gateway]
• [Primary DNS suf-
fix]
• DNS settings
• WINS settings
• IPv6 settings
• [Test the TCP/IP
connection]
• [Date and time]
• [System of meas-
urement]
• [Time zone]
Access Settings Editor settings via the operator panel
Short description
The [Connectivity] section contains the main
settings to integrate the printer into a network.
After you have adapted the network settings,
you can test the connection from here.
Follow the instructions on the operator panel
when you adapt the network settings.
The [System settings] section contains settings
to change the date and time of the system, or
the system of measurement used. When you
change the system of measurement, all corre-
sponding values on the system will be
changed. For example, when you change [Met-
ric] into [Imperial], all values will be displayed
in inches.
Chapter 6 - Adapt printer settings to your needs 89