Change The Job Settings Before Printing; Change The Number Of Sets - Canon IMAGEPRESS C7011VPS SERIES Operation Manual

Change the job settings before printing

Change the job settings before printing

Change the number of sets

Introduction
Follow the procedure below to change the number of sets for a job that is present in the list of
[Waiting jobs] or [Scheduled jobs], or in a [DocBox].
Procedure
1.
Touch [Jobs] -> [Waiting jobs] or [Scheduled jobs], or select a [DocBox].
2. Touch the job of which you want to change the number of sets.
NOTE
You can only change the settings of the active print job
[Stop] button
3.
Touch [Properties], or touch the job twice to open the [Properties] window.
4.
Touch the [Number of sets] button.
5. Enter the desired number of sets (between 1 and 65,000).
NOTE
Touch the arrow button <- to correct the previous entry or touch [Cancel] to close the numerical
keyboard without saving the changes.
6.
Press [OK].
7.
Press [OK].
184 Chapter 8 - Carry out print jobs
two times).
after you stopped the printer (press the