Change The Binding Edge - Canon IMAGEPRESS C7011VPS SERIES Operation Manual

Change the binding edge

Introduction
The binding edge determines whether the binding position is along the long edge or the short
edge of the media. The binding edge is usually set via the printer driver, for example. However,
you can view and change the binding edge via the operator panel. The binding edge has a
relation with the direction of the margin shift, orientation and staple position.
NOTE
When the binding edge is changed for [2-sided] printing, the image orientation is automatically
adjusted to get the correct layout. The orientation of the image on the back side of the page will
be changed too.
Procedure
1.
Touch [Jobs] -> [Waiting jobs], or select a [DocBox].
2.
Touch the job you want to change.
NOTE
You can only change the settings of the active print job
[Stop] button
3.
Touch [Properties], or touch the job twice to open the [Properties] window.
4.
Touch the [Binding edge] button.
5.
Touch the desired value.
6.
Press [OK].
7. Press [OK].
two times).
Change the binding edge
after you stopped the printer (press the
Chapter 8 - Carry out print jobs 191