Thank you for purchasing the Canon imagePRESS C7010VPS/C6010VPS/C6010S. Please read the safety instructions in this manual thoroughly before operating the machine. After reading this manual, store it in a safe place for future reference. 1 How To Use This Manual About This Manual This manual is targeted at general users of the machine.
Abbreviations Used in These Manuals In these manuals, product names and model names are abbreviated as follows: Microsoft Windows 2000 Operating System: Microsoft Windows 2000 Professional Operating System: Microsoft Windows 2000 Server Operating System: Microsoft Windows Server 2003 Operating System: Microsoft Windows XP Professional Operating System: Microsoft Windows XP Operating System: Microsoft Windows Vista Operating System:...
Trademarks MEAP and the MEAP logo are trademarks of Canon Inc. Apple, AppleTalk, EtherTalk, LocalTalk, Macintosh, Mac, Mac OS, QuickTime, and Power Mac are trademarks of Apple Inc., registered in the U.S. and other countries. Safari and Tiger are trademarks of Apple Inc.
(if under warranty), or with whom you have a servicing contract. If you are not sure who to contact, and have both purchased and are using the equipment in the U.S.A., please refer to the "SUPPORT" page on Canon U.S.A.'s Web site (http://www.usa.canon.com).
Disclaimers The information in this document is subject to change without notice. CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT.
Legal Limitations on the Usage of Your Product and the Use of Images Using your product to scan, print or otherwise reproduce certain documents, and the use of such images as scanned, printed or otherwise reproduced by your product, may be prohibited by law and may result in criminal and/or civil liability.
3 Important Safety Instructions Please read these "Important Safety Instructions" thoroughly before operating the machine. As these instructions are intended to prevent injury to the user or other persons or destruction of property, always pay attention to these instructions. Also, since it may result in unexpected accidents or injuries, do not perform any operation unless otherwise specified in the manual.
• Do not remove the machine's leveling feet after the machine has been installed, as this may cause the machine to fall or tip over, resulting in personal injury. Power Supply WARNING • Do not damage or modify the power cord. Also, do not place heavy objects on the power cord, or pull on or excessively bend it, as this could cause electrical damage and result in a fire or electrical shock.
Shutting Down the Machine in an Emergency This machine has a breaker that detects excess current or leakage current. Make sure to turn the breaker dial to the OFF (" power switch in an emergency. Handling WARNING • Do not attempt to disassemble or modify the machine. There are high-temperature and high-voltage components inside the machine which may result in a fire or electrical shock.
CAUTION • Do not place heavy objects on the machine, as they may tip over or fall resulting in personal injury. • Close the optional feeder/platen cover gently to avoid catching your hands, as this may result in personal injury. •...
Maintenance and Inspections WARNING • When cleaning the machine, first turn OFF the main power switch, then disconnect the power cord. Failure to observe these steps may result in a fire or electrical shock. • Disconnect the power cord from the power outlet regularly, and clean the area around the base of the power plug's metal pins and the power outlet with a dry cloth to ensure that all dust and grime is removed.
• Handle the toner cartridge carefully. Avoid contact with any toner that is released from the cartridge. If toner makes contact with your skin, immediately wash the area with soap and cold water. If your skin still feels irritated after washing the area thoroughly, or you ingest toner, seek immediate medical treatment.
Safety Labels CAUTION • The laser beam can be harmful to human bodies. Since radiation emitted inside the product is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation. Read the following remarks and instructions for safety.
■ Inside the Marking Engine ■ Back of the Marking Engine...
■ Back of the Power Supply Unit ■ Inside the Fixing Station CANON INC. 30 - 2, SHIMOMARUKO, 3 - CHOME, OHTA - KU, TOKYO, JAPAN MANUFACTURED : THIS PRODUCT CONFORMS WITH DHHS RADIATION PERFORMANCE STANDARD 21CFR CHAPTER 1 SUBCHAPTER J.
4 Installation Location and Handling This section describes precautions for installation location and handling. We recommend that you read this section prior to using this machine. Installation Precautions For more information, see the Installation and Operating Environment Guidelines. If you do not have it, contact your local authorized dealer.
■ Avoid poorly ventilated locations. This machine generates a slight amount of ozone etc. during normal use. Although sensitivity to ozone etc. may vary, this amount is not harmful. Ozone etc. may be more noticeable during extended use or long production runs, especially in poorly ventilated rooms.
■ Avoid exposing the machine to rapid changes in temperature. If the room in which the machine is installed is cold but rapidly heated, water droplets (condensation) may form inside the machine. This may result in a noticeable degradation in the quality of the copied image, the inability to properly scan an original, or the copies having no printed image at all.
Select a Safe Power Supply ■ Plug the machine into a 3-phase 5-wire, 208V AC 30 A outlet (C7010VPS/C6010VPS/ C6010S). ■ Make sure that the power supply for the machine is safe, and has a steady voltage. ■ Do not connect other electrical equipment to the same power outlet to which the machine is connected.
Provide Adequate Installation Space ■ Provide enough space on each side of the machine for unrestricted operation. ■ Keep the back of the machine at least 31 1/2" (800 mm) away from a wall. The optional Saddle Finisher-AJ2 is attached. 19 3/4"...
Moving the Machine ■ If you intend to move the machine, even to a location on the same floor of your building, contact your local authorized dealer beforehand. Do not attempt to move the machine yourself. Handling Precautions ■ Do not attempt to disassemble or modify the machine. ■...
■ Do not turn the main power switch OFF or open the front covers while the machine is in operation. This may result in paper jams. ■ Do not use flammable sprays, such as spray glue, near the machine. There is a danger of ignition.
5 Periodic Inspection of the Breaker This machine has a breaker that detects excess current or leakage current. Make sure to test the breaker once or twice a month using the following procedure. IMPORTANT If a malfunction occurs after an inspection, contact your local authorized dealer. Checking the Breaker Turn OFF the main power.
IMPORTANT • Do not use the test button to turn the power ON and OFF. • If the breaker dial does not turn to the OFF (" " side) position, repeat step 2. • If the breaker dial does not turn to the OFF (" " side) position, despite carrying out the above procedure two or three times, contact your local authorized dealer.
6 Check Sheet for the Periodic Inspection of the Breaker Copy this page for future use, and store it in a safe place near the machine to document your periodic inspections of the breaker. ■ How to Inspect the Breaker Periodically Follow the procedure described in "5 Periodic Inspection of the Breaker,"...
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands (See http://www.canon-europe.com/ for details on your regional dealer)