Canon IMAGEPRESS C7011VPS SERIES Operation Manual page 114

Adjust the paper tray to hold a different media size
3.
Load the desired paper to approximately 10 mm / 3/8" in height. Slide the outer size change plate
and inner size change plate to align them with the desired paper size.
IMPORTANT
Do not subject the paper holder plate to shock when loading paper into the paper tray, as this
may result in a malfunction or damage to the machine.
IMPORTANT
Adjust the guides correctly to avoid causing a paper jam, dirty prints, or make the inside of the
machine dirty.
4. Lock the lever of the size change plate and fix it.
5.
Squeeze the lever on the outer size change plate below. Without releasing the lever, slide the rear
guide to align it with the desired paper size.
114 Chapter 7 - Media handling