Switch to Copy/Fax/Scan/USB Print Mode
Switch to Copy, Fax, Scan, or USB Print mode first to use each mode.
Copy Mode
Fax Mode
Scan Mode
USB Print
Mode
•
If you use the Fax mode for the first time:
Fax setup guide will appear on the display. Refer to the on-screen instructions and Getting Started to configure the settings.
•
To set a frequently used mode to the standby mode:
] <Preferences> <Display Settings> <Default Screen after Startup/Restoration>
Press [
Select the screen [OK] [
•
To specify how long the machine waits before returning to the standby mode:
] <Timer Settings> <Auto Reset Time> Specify the time <Apply> [
Press [
Press the desired mode key.
If you do not operate the machine for a while, the machine
returns to the Copy mode (standby mode) automatically.
Displays the copy ratio, paper source,
paper size, and number of copies.
To change the settings:
▲
▼
1. Press [
] or [
▲
▼
2. Press [
], [
Displays the recipient's number.
To change the settings:
▲
▼
1. Press [
] or [
▲
▼
2. Press [
], [
To select the scan method:
▲
▼
Press [
] or [
] to highlight an item, and then press [OK].
To select the printing method:
▲
▼
Press [
] or [
] to highlight an item, and then press [OK].
].
] to highlight an item, and then press [OK].
◄
►
], [
] or [
] to specify the values, and then press [OK].
] to highlight an item, and then press [OK].
◄
►
], [
] or [
] to specify the values, and then press [OK].
].
15