25.1 ROM Correction Functions
The PD78058F, 78058FY Subseries can replace part of a program in the mask ROM with a program in the internal
expansion RAM.
Instruction bugs found in the mask ROM can be avoided, and program flow can be changed by using the ROM
correction.
The ROM correction can correct two places (max.) of the internal ROM (program).
Caution
The ROM correction cannot be emulated by the in-circuit emulator (IE-78000-R, IE-78000-R-A,
IE-78K0-NS and IE-78001-R-A).
25.2 ROM Correction Configuration
The ROM correction is executed by the following hardware.
Item
Register
Control register
Figure 25-1 shows a block diagram of the ROM correction.
Program counter (PC)
Correction address
register n (CORADn)
Remark n = 0, 1
CHAPTER 25 ROM CORRECTION
Table 25-1. ROM Correction Configuration
Correction address registers 0 and 1 (CORAD0, CORAD1)
Correction control register (CORCN)
Figure 25-1. Block Diagram of ROM Correction
Match
Comparator
Internal bus
Configuration
Correction branch request
signal (BR !7FDH)
CORENn CORSTn
Correction control register
527