IE-78K0-NS-P04, IE-780948-NS-EM4
3.1 Installation Procedure
<1> Remove the 4 screws at the sides of the IE-78K0-NS-A and open the top of the cover.
<2> Remove the screws on the option board (G-78K0H) and remove the option board.
<3> Setup the jumper's on the main board (G-780009).
It is necessary to set some jumpers on the main board for the clock selection. An example for the
jumper setting will be given in the chapter clock setting.
Jumper JP2
Jumper JP3
24
Figure 3-1: IE-78K0-NS-A inside
Main board
(G-780009)
Table 3-1: Flash ROM Mode
Jumper Position
(1-2)
Internal use
(2-3)
Internal use (default)
Table 3-2: Internal Mode 1
Jumper Position
(1-2)
Internal use (default)
(2-3)
Internal use
Option Board
(G-78K0H)
Function
Function