A/D Converter Basic Operation - NEC PD78056F User Manual

Pd78058f series; pd78058fy series 8-bit single-chip microcontrollers

Table of Contents

Sampling Time

A/D Converter

A/D conversion operations are performed continuously until bit 7 (CS) of ADM is reset (0) by software.

If a write to the ADM is performed during an A/D conversion operation, the conversion operation is initialized, and

if the CS bit is set (1), conversion starts again from the beginning.

After RESET input, the value of ADCR is undefined.

CHAPTER 14 A/D CONVERTER

Figure 14-5. A/D Converter Basic Operation

A/D Conversion