Serial Interface Channel 1 Configuration - NEC PD78056F User Manual

18.2 Serial Interface Channel 1 Configuration

Serial interface channel 1 consists of the following hardware.
Item
Register
Control register
Note See Figure 6-5 and Figure 6-7 P20, P21, P23 to P26 Block Diagram and Figure 6-6 and Figure 6-8
P22 and P27 Block Diagram.
388
CHAPTER 18 SERIAL INTERFACE CHANNEL 1
Table 18-1. Serial Interface Channel 1 Configuration
Serial I/O shift register 1 (SIO1)
Automatic data transmit/receive address pointer (ADTP)
Timer clock select register 3 (TCL3)
Serial operating mode register 1 (CSIM1)
Automatic data transmit/receive control register (ADTC)
Automatic data transmit/receive interval specify register (ADTI)
Port mode register 2 (PM2)
Configuration
Note