NEC PD78212 User Manual page 461

µ PD78214 Sub-Series
HARDWARE (2/2)
EV-9200G-74
EV-9200GC-64
PG-1500
#
PA-78P214CW
PA-78P214GC
PA-78P214GJ
PA-78P214GQ
PA-78P214L
Remarks 1. The EP-78210GC, EP-78210GJ, EP-78240GC-R, and EP-78240GJ-R are provided with one EV-9200G-74 or
EV-9200GC-64.
2. The EV-9200G-74 and EV-9200GC-64 are supplied in batches of five.
432
This socket is mounted on the board of the user system developed for the 74-
pin QFP. It is used together with the EP-78210GJ or EP-78240GJ-R.
This socket is mounted on the board of the user system developed for the 64-
pin QFP. It is used together with the EP-78210GC or EP-78240GC-R.
This PROM programmer, when connected to an accessory board and the
optional programmer adapter, enables programming of the PROM built into a
single-chip microcomputer, either in its stand-alone mode or under the control
of the host machine. PROMs having typical capacities, from 256K to 4M bits,
can be programmed.
This PROM programmer adapter is used with the µ PD78P214CW and
µ PD78P214DW. It is used together with a PROM programmer such as the PG-
1500.
This PROM programmer adapter is used with the µ PD78P214GC-AB8. It is used
together with a PROM programmer such as the PG-1500.
This PROM programmer adapter is used with the µ PD78P214GJ-5BJ. It is used
together with a PROM programmer such as the PG-1500.
This PROM programmer adapter is used with the µ PD78P214GQ-36. It is used
together with a PROM programmer such as the PG-1500.
This PROM programmer adapter is for the µ PD78P214L. It is used together
with a PROM programmer such as the PG-1500.