Programmable One-Touch Keys; Using The Power Of Programmable One-Touch Keys; Programming A Delayed Transmission - Muratec F-100 Operating Instructions Manual

Beyond the basics
print a report, make settings (including on the autodialer) or even make copies.
But the F-150's and F-120's TriAccess allows a minimum of three operations at once. For example, even if the machine is (1) printing a copy and (2) receiving into memory, it is
(3) still available for you to scan in documents for memory transmission.
Note: The F-100 does not have TriAccess; however, it does have dual access.
Programmable one-touch
keys
2.36

Using the power of programmable one-touch keys

The programmable one-touch keys
P
you really tap into your machine's power.
Note: Toggle between the two sets of programmable keys,
turning the fliptab back and forth; whichever set is visible is ready for use.
You can "teach" these keys the following multi-step operations for one-keypress con-
venience (the pages shown contain instructions for the specific operations):
• Delayed transmission (pages 2.21–2.23)
• Broadcasting (pages 2.18–2.20)
• Relay broadcast initiation (pages 2.19–2.20)
• SecureMail transmission (pages 2.46–2.49)
• Polling, regular and database (not continuous) (pages 2.31–2.33)
• Batch transmission (pages 2.24–2.27)
There is a great deal of similarity among how you set the various operations; but,
for your convenience, we'll give you full instructions for each one. Just
we'll summarize by saying that, each time, you tell the machine four simple things:
• How — The key you're programming
• Who — The number(s) the machine should dial
• What — The operation it should perform
• When — The date(s) and time(s) when you want it to perform the operation.

Programming a delayed transmission

Note: To erase a programmable one-touch key, refer to page 2.43.
To program a delayed transmission into a programmable one-touch key:
1
Press / , , 1,
PROGRAM C ENTER
Select Program No.
... or indicates a command already is programmed into this key.
If 01 is the key you want to program, skip to step 3. (However, our examples
P
from here will say " 08" rather than "
P
1– 12 simplify complex fax operations, letting
P
1– 6 and
P P P
FYI
. The either shows:
LCD
01.")
P
7– 12, by
P
, however,