Notes And Restrictions On The Use Of The Copy Feature - Fuji Xerox ApeosPort-V 7080 Administrator's Manual

The output device is activated when Secure Print is executed using job tickets of
ContentsBridge Utility.
Opening and Closing of the Document Cover during the Power Saver Mode
If you open the document cover during the Power Saver mode, and then start scanning a
document immediately after the machine exits the mode, the detection error of a document
size may occur. In this case, enter the document size manually. It takes a few seconds before
the machine can detect a document size automatically. This detection error will not occur if
you load a document, close the document cover, and wait for a few seconds before start
scanning a document.
About View Image Generation
It may take time for generating view images depending on the type of document. If you
want to speed up the printing process or there is no need for displaying view images, you
can disable the image generation setting of the print driver.
Note

Notes and Restrictions on the Use of the Copy Feature

Copy Feature
The machine does not offer the Improves Fit feature.
Copy and Simple Copy
You cannot switch the screen between the Copy and Simple Copy services. Return to the
Services Home screen, and then select a service. In that case, the settings specified in either
service are cleared.
ID Card Copy
The machine does not shift the ID card image to the center of the output in any
magnification ratio and image size you specified.
When the reduced size is specified to copy an ID card, the machine may copy the ID card
in a different orientation from the original orientation depending on the magnification
ratio specified.
Notes and Restrictions on the Use of the Print Feature
Output of Long Feed Documents
The output of long feed documents is not supported.
PostScript Driver
Some options such as Poster (Photo Enlargement) are not supported by the PostScript driver.
With the Pages per Sheet (N-Up) feature, you can specify 2, 4, 6, 9, or 16 pages up, and with
or without frame borders.
Printing from Macintosh via USB Connection
When you send a print job from the PostScript driver of Macintosh connected via USB and
the job includes application data with graphic data (EPS file including binary data) pasted,
the machine may misidentify the binary data as protocol data; therefore, the output of text
data may extend for multiple pages.
• The print driver settings have priority over the machine settings.
Notes and Restrictions
693
16