Address Book Settings - Fuji Xerox ApeosPort-V 7080 Administrator's Manual

Address Book Settings

In [Address Book Settings], you can configure settings related to the e-mail and the address
book.
1
On the [Tools] screen, select [System Settings] > [Address Book Settings].
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.112).
2
Select an item to set or change.
Address Book Type
Select the type of the Address Book from [Type 1] or [Type 2].
Directory Service
Select whether or not to use an address book stored on the directory server.
Even when [Enabled] is selected, the address book of the directory server will not be started
unless the following conditions are satisfied.
The IP address of the machine must be set.
The IP address or Internet address of the directory server (primary) must be set.
The port numbers used for LDAP communication must be set on the directory server and
the machine.
Address Book Default - Scan
Select from [Public Entries] or [Network Entries].
Note
Address Book Default - Fax
Select from [Public Entries] or [Network Entries].
Note
Search Display Default
Select from [Simple Search] or [Advanced Search].
Note
Fax Speed Dial Default
Specify the default speed dial to display at the top of the [Fax Address Book] screen.
Set the number from 1 to 2000.
Note
• This item can be set when [Directory Service] is set to [Enabled].
• This item can be set when [Directory Service] is set to [Enabled].
• This item can be set when [Address Book Type] is set to [Type 1].
• Available numbers to assign to speed dials are different depending on your machine configuration .
For more information, contact our Customer Support Center.
Address Book Settings
239
5