Fuji Xerox ApeosPort-V 7080 Administrator's Manual page 660

16 Appendix
Parameter
Binding
Line termination
Default custom
paper size
Print Quantity
Setup
16
660
Item No.
217 Sets binding when printing 2 sided.
You can select [LEF] or [SEF] for 2 sided printing. Select according to the edge to
be bound. Unifies the leading direction of the image on the front and rear sides
of the paper at the long edge of the paper for LEF and at the short edge of the
paper for SEF.
[0] (Default) : LEF
[1] : SEF
218 Sets line termination processing.
[0] (Default) : Off
[1] : Add-LF (Appends an LF to CR)
[2] : Add-CR (Appends a CR to LF and FF)
[3] : CR-XX (Appends a CR to LF and FF, and LF to CR)
219 Specifies the default custom paper size.
(Short [2100] (Default short-edge value)
edge) [2970] (Default long-edge value)
[0] - [9999]
220
(Long
edge)
221 Sets the method for specifying the number of copies to print.
[0] : Protocol
[1] : Panel
[2] (Default) : Command
Value
: 210.0 mm
: 297.0 mm
: 0 to 999.9 mm