16 Appendix
Status
Total
16
730
Item
The result of the operation is indicated.
Completed
Busy
Auto Send
Canceled
Check Remote
Station
Send Again
Receive Again
Disconnected
XXX-XXX
For more information on lines, refer to "2 Product Overview > "Machine
Components" > "Telephone line connectors" in the User Guide and for more
information on XXX-XXX (error code), refer to "Error Code" (P.449).
For more information on how to connect network cables, refer to "Using the
Ethernet Interface" (P.22).
All pages received or sent are recorded.
Description
: The operation ended normally.
: The recipient is busy or did not answer.
: The document is being re-sent and the set re-
send times has not been exceeded.
: The communication was terminated.
: An error caused by the recipient or the line
during communication.
: The document must be re-sent because the re-
send times have reached the maximum due to
a transmission error.
: A polling request must be re-sent due to a
polling reception error. Or, you must ask a
sender to resend the document due to a
reception error.
: Check that the line is properly connected.
When IP Fax (SIP) is used, check that the
network cable is properly connected.
: Error code