Fuji Xerox ApeosPort-V 7080 Administrator's Manual page 510

15 Problem Solving
Error Code
026-702 [Cause]
[Remedy] Wait for a while and execute the operation again. If the error still is not resolved, contact
026-703 [Cause]
[Remedy] Authenticate when adding documents.
026-704 [Cause]
[Remedy] Print using the print driver (PCL, etc.) from DocuWorks Viewer.
026-705
[Cause]
[Remedy] Change the [Image Quality] setting from [High Resolution] to [High Quality], or from
026-706 [Cause]
[Remedy] Release the print prohibited settings using DocuWorks Viewer, and then execute the
026-707 [Cause]
[Remedy] Set the correct password on ContentsBridge.
026-708
[Cause]
[Remedy] Take one of the following measures:
026-709 [Cause]
[Remedy] Wait around one day, and when capacity becomes available as a result of the
026-710 [Cause]
[Remedy] Take one of the following measures:
026-711
[Cause]
15
[Remedy] Take one of the following measures:
Note
026-712 [Cause]
[Remedy] Retry after waiting for a while.
510
Cause and Remedy
The number of accesses from the LDAP server to the machine by Address Book
operation exceeded the machine's processing capability.
our Customer Support Center.
Authentication is canceled when adding documents during faxing or scanning.
An error occurred during processing DocuWorks documents.
Unable to process for DocuWorks documents because of insufficient memory space.
[High Quality] to [Standard]. Or, add memory. If the error still is not resolved, increase
memory. If the problem persists even after adding memory to the maximum capacity,
print using the print driver (PCL, etc.) from DocuWorks Viewer.
Attempted to print a DocuWorks document of which printing is prohibited.
operation again.
When processing password-protected DocuWorks documents, the password entered
does not match that of the DocuWorks document.
Exceeded the maximum limit for the scan data size that can be stored for one job with
Store & Send Link.
1)Reduce the resolution (scan quality) of the scan parameters and execute the
operation again.
2)Reduce the image with magnification of the scan parameters (such as A3 > A4) and
then execute the operation again.
3)If [Store & Send Link - Maximum File Size] is set to a small value, increase the value.
The capacity of the hard disk that can be used to store scan data with Store & Send Link
is insufficient.
automatic deletion of files, execute the operation again.
The machine has received and e-mail encrypted by S/MIME, but does not support the
encryption method.
Ask the sender to send the e-mail encrypted by 3DES.
Disable the FIPS140 validation mode of the machine.
Exceeded the maximum size allowed for a multi-page file when scanning.
1)Reduce the resolution (scan quality) of the scan parameters and execute the
operation again.
2)Reduce the number of document pages and then execute the operation again.
The maximum size is 2 GB for TIFF, XPS, and PDF, and 1 GB for XDW.
• XPS stands for XML Paper Specification.
An error occurred while operating from CentreWare Internet Services.