Fuji Xerox ApeosPort-V 7080 Administrator's Manual page 470

15 Problem Solving
Error Code
016-757 [Cause]
[Remedy] Enter the correct passcode.
016-758 [Cause]
[Remedy] Consult your system administrator.
016-759 [Cause]
[Remedy] Consult your system administrator.
016-760
[Cause]
[Remedy] Take one of the following measures:
For more information on [Image Quality], refer to the help of the print driver. For more information on memory, refer to
"Allocate Memory" (P.206).
016-761 [Cause]
[Remedy] Set [Image Quality] to [Standard] and execute the operation again. If the error still is
016-762
[Cause]
[Remedy] For [USB] in [Print Mode] under [Port Settings], specify correct printer language.
016-763 [Cause]
[Remedy] Confirm the POP server IP address set on the machine.
016-764 [Cause]
[Remedy] Consult the SMTP server administrator.
016-765 [Cause]
[Remedy] Consult the SMTP server administrator.
016-766
[Cause]
[Remedy] Consult the SMTP server administrator.
016-767 [Cause]
[Remedy] Confirm the address, and try sending again.
016-768 [Cause]
[Remedy] Confirm the machine's mail address.
016-769 [Cause]
[Remedy] Send e-mail without setting delivery receipts (DSN).
016-770 [Cause]
[Remedy] Consult your system administrator whether Direct Fax is available. If it is available,
15
016-772 [Cause]
[Remedy] Set the DNS server address.
016-774 [Cause]
[Remedy] Delete unnecessary data from the hard disk to free up disk space.
016-775 [Cause]
[Remedy] Delete unnecessary data from the hard disk to free up disk space.
470
Cause and Remedy
The passcode is incorrect.
The division does not have permission to use the service.
The number of pages reached the maximum number of pages for this service.
An error occurred during PostScript (optional) processing.
Set [Image Quality] to [High Speed].
Increase PostScript memory.
An error occurred during image processing.
not resolved, set [Print Page Mode] to [On].
The specified printer language is not installed on the machine.
Unable to connect to the POP server.
Unable to connect to the SMTP server.
Unable to send the e-mail because the hard disk on the SMTP server is full.
An error occurred on the SMTP server.
Unable to send the e-mail because the address is not correct.
Unable to connect to the SMTP server because the machine's mail address is incorrect.
The SMTP server does not support delivery receipts (DSN).
Direct Fax is restricted.
contact our Customer Support Center.
The DNS server address is not set.
Unable to process compression conversion because of insufficient hard disk space.
Unable to process image conversion because of insufficient hard disk space.