Notes And Restrictions On The Use Of The Copy Feature - Fuji Xerox ApeosPort-V C5580 Administrator's Manual

16 Appendix










Notes and Restrictions on the Use of the Copy Feature

 Copy Feature
The machine does not offer the Improves Fit feature.
 Meter Count for Dual Color and Single Color Copies
16
Dual color and single color copies are counted as color copies.
 Color Effect for Dual Color Copy
To extract colors for dual color copy, adjusting the colors of the document is required in
advance.
Our service representative performs the adjustment. Contact our Customer Support Center.
676
After the machine is activated from the Power Saver mode, a message does not appear
on the touch screen if you perform the following operations while the service to be used
for the output device, such as copying and secure printing, is not selected.
- Opening and closing the top cover of the document feeder
- Opening and closing the machine front door
- Opening and closing the bottom left door
- Opening the paper tray
- All the operations including opening and closing the finisher front door, and pressing
the buttons
However, the confirmation message appears and the <Error> indicator lights up when the
machine is activated (exits the Power Saver mode) while each cover or a paper tray is
open.
After the machine exits the Power Saver mode, the value detected before the machine
enters the Power Saver mode is displayed or informed as paper tray status and the
information on the consumables such as the toner remaining amount, status of the drum
cartridge, and paper, if the service used for the output device is not activated.
After the machine exits the Power Saver mode, be careful for the following if you use the
copy feature before you activate the service used for the output device.
The information displayed such as a paper size specified for the paper tray or the
remaining amount is detected before the Power Saver mode. If you change the paper size
or remaining amount during the Power Saver mode, it takes a few seconds for the change
to be updated on the screen.
Exiting the Power Saver mode activates the entire machine when Copy, Simple Copy, or
Stored Programming are set as the default screen on the touch screen.
Exiting the Power Saver mode activates the entire machine when [Paper Tray Attributes
During Loading] is set to [On].
The entire machine exits the Power Saver mode when you press the <Machine Status>
button, enter the System Administration mode, or select the Stored Programming service.
The machine does not exit the Sleep mode when you use the EP service by EP-BB.
When [Tools] > [System Settings] > [Connectivity & Network Setup] > [Port Settings] >
[USB] > [USB - Print Mode] is set to any option other than [Auto], exiting the Power Saver
mode activates the entire machine.
The output device is activated when Secure Print is executed using job tickets of
ContentsBridge Utility.