Fuji Xerox ApeosPort-V 7080 Administrator's Manual page 520

15 Problem Solving
Error Code
027-728 [Cause]
[Remedy] Reduce the number of files, and send them again.
027-730
[Cause]
[Remedy] Increase the number of pages allowed for the Split Send feature, or reduce the number
027-731
[Cause]
[Remedy] After the scanning for Network Scanning completes, execute the operation again.
027-732 [Cause]
[Remedy] Check the amount of available disk space. If the disk space is sufficient and the error still
027-733
[Cause]
[Remedy] Enable the SSL setting of the Network Scanning server.
027-734 [Cause]
[Remedy] Check the followings:
027-735 [Cause]
[Remedy] Enable the SSL setting, or specify HTTP for the transfer protocol.
027-736 [Cause]
[Remedy] Enable the server certificate validation. Or, disable the server certificate validation for
027-737 [Cause]
[Remedy] Check on the directory where the job templates are stored, and confirm whether the
027-739 [Cause]
[Remedy] Confirm the path name of the pool server for job templates.
027-740 [Cause]
[Remedy] Confirm whether the login user name and the login password are correct.
027-741
[Cause]
15
[Remedy] Consult your network administrator for the network environment and the server
027-742 [Cause]
[Remedy] Delete unnecessary data from the hard disk to free up disk space.
027-743
[Cause]
[Remedy] Confirm whether the settings of the pool server for job templates are correct.
520
Cause and Remedy
The number of files that are to be sent to external services exceeded the maximum
number.
The number of the document pages attached to the SMTP mail exceeds the maximum
number of pages allowed for the Split Send feature.
of the document pages.
An error occurred in the machine.
The Network Scanning server is full, or a server disk error occurred.
is not resolved, check the status of the disk of the server.
The SSL setting on the Network Scanning server is disabled.
The certificate of the server used for Network Scanning is not set correctly.
The Network Scanning server is accessible from your computer using HTTPS protocol.
The SSL server certificate of the Network Scanning server is registered on the machine.
The SSL server certificate of the Network Scanning server is correct.
When the certificate is not registered on the Network Scanning server, disable the
server certificate validation feature of the machine.
The data transfer using SSL is specified, but the SSL setting of the machine is disabled.
The server certificate verification feature of the machine is disabled when the server
certificate verification is required.
data transfer.
An error occurred while reading data from the pool server for job templates.
settings including the access privilege are correct.
A specified pool server for job templates cannot be found.
Login to the pool server for job templates failed.
Unable to connect to the pool server for job templates.
configuration.
The capacity of the hard disk is insufficient and job templates cannot be stored.
The settings of the pool server for job templates are not correct.