Fuji Xerox ApeosPort-V 7080 Administrator's Manual page 665

Parameter Item No.
Output 109
destination
2 sided printing 110
Alphanumeric 112
fonts
Position 113
adjustment (Vertical
position
adjustment)
114
(Horizontal
position
adjustment)
Number of sets 115
Sets the output tray for the printouts.
[0] (Default) : Center Tray - Lower
[1] : Side Tray (optional)
[2] : Center Tray - Upper (optional)
[80] : Right Middle Tray (optional)
[81] : Right Top Tray (optional)
Sets 2 sided printing.
[0] (Default) : None
[1] : Head to head
[2] : Head to toe
Sets the font for single-byte characters.
For more information on fonts, refer to "Internal Fonts" (P.621).
[0] (Default) : Stroke
[1] : Roman
[2] : Sans serif
Adjusts the hard clip area vertically or horizontally. You can set from -250 mm
to +250 mm in 1 mm increments.
[0] (Default) : Does not move the hard clip area.
[1] - [250] : -250 to -1 mm
[251] - [500] : +1 to +250 mm
Important • Data outside the printable area is not printed regardless of the adjustment
of the print position. In addition, data moved outside the printable area as
a result of adjusting the print position is not printed.
Sets the method for specifying the print sets.
[0] (Default) : Protocol
[1] : Panel
[2] : Command
HP-GL/2 Emulation
Value
16
665