Fuji Xerox ApeosPort-V 7080 Administrator's Manual page 533

Error Code
041-325 [Cause] An error occurred.
041-328
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
041-329 [Cause] An error occurred in the machine.
041-330
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
041-331
on the machine power. Try again. If the error still is not resolved, contact our Customer
041-332 Support Center.
041-333
041-336
041-337
041-340
041-343 [Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
042-316
[Cause] An error occurred in the machine.
042-323
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
042-330
on the machine power. If the error still is not resolved, contact our Customer Support
042-331 Center.
042-332
042-333
042-363
045-310 [Cause] An error occurred.
045-311
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
045-312
on the machine power. If the same message is displayed again, contact our Customer
045-313
Support Center.
047-210 [Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. Try again. If the error still is not resolved, contact our Customer
Support Center.
047-213
[Cause] Detected the installation of a finisher of a different type than expected.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
047-310 [Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. Try again. If the error still is not resolved, contact our Customer
Support Center.
061-320 [Cause] An error occurred in the machine.
061-325
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
061-344
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
062-277 [Cause] A communication error occurred between the document scanning unit and the
document feeder.
[Remedy] Contact our Customer Support Center.
Cause and Remedy
Error Code
15
533