Solving Curled Output (For D2-Staple-Finisher With Booklet Maker) - Fuji Xerox ApeosPort-V 7080 Administrator's Manual

Solving Curled Output (for D2-Staple-Finisher with Booklet Maker)

The following describes how to correct the curling of the output by pressing the De-curl
button.
The De-curl button functions both in suspension and in operation if the power of the
machine is on.
Note
1
Check how the output copy is curled.
2
Check that De-curl lights up.
Note
3
Press De-curl. Press De-curl.
AUTO
Note
For more information, refer to Mode and function of <De-curl> button601
Solving Curled Output (for D2-Staple-Finisher with Booklet Maker)
• To change the curling correction mode while the machine is in operation, press the De-curl button
and then the change will be applied immediately.
• Pressing the Reset button on the control panel cannot change the curling correction mode.
• When turning on the power of this machine,
the de-curl mode is set to Auto.
• When you cancel the Power Saver Mode, the
de-curl mode will be set to Auto.
ON
• Pressing the De-curl button toggles the mode between Auto, ON, and OFF.
OFF
15
601