Table of Contents
Advertisement
2) Check tooth tip of each notch for damage or wear. If
any damage or wear is found, replace parking lever.
3) Check parking brake lever for proper operation and
stroke, and adjust it if necessary.
For checking and adjusting procedures, refer to
"Parking Brake Inspection and Adjustment in Section
4D".
Parking brake lever stroke
"a": 4 – 9 notches (with 200 N (20 kg, 44 lbs) of pull
pressure)
Clutch Fluid Inspection
1) Check clutch system for evidence of fluid leakage.
Repair leaky point if any.
2) Check reservoir for fluid level referring to "Clutch
Fluid Level Inspection in Section 5C".
If fluid is lower than minimum level (1) of reservoir,
refill reservoir with specified brake fluid indicated on
reservoir cap (2).
1
Tires Inspection
1) Check tires for uneven or excessive wear, or
damage. If defective, replace.
Refer to "Irregular and/or Premature Wear
Description in Section 2D" and "Wear Indicators
Description in Section 2D" for details.
1. Wear indicator
2) Check inflating pressure of each tire and adjust
I4RS0B020005-01
pressure to specification as necessary.
NOTE
S6RW0D0206019
• Tire inflation pressure should be checked
when tires are cool.
• Specified tire inflation pressure should be
found on tire placard or in owner's manual
which came with the vehicle.
3) Rotate tires. For details, refer to "Tire Rotation in
Section 2D".
Wheel Discs Inspection
2
Inspect each wheel disc for dents, distortion and cracks.
A disc in badly damaged condition must be replaced.
Wheel Bearing Inspection
1) Check front wheel bearing for wear, damage,
abnormal noise or rattles. For details, refer to "Front
Wheel Hub, Disc, Bolt and Bearing Check in Section
2B".
I5RW0A020005-01
2) Check rear wheel bearing for wear, damage,
abnormal noise or rattles. For details, refer to "Rear
Wheel Disc, Bolt and Bearing Inspection in Section
2C".
Maintenance and Lubrication:
0B-8
S6RW0D0206020
I2RH01020022-01
S6RW0D0206021
S6RW0D0206022
I2RH01020023-01
Advertisement
Chapters
Table of Contents
Troubleshooting
