Suzuki 2006 SX4 Service Manual page 12

00-5 Precautions:
• When removing the battery, be sure to disconnect the
negative cable first and then the positive cable. When
reconnecting the battery, connect the positive cable
first and then the negative cable, and replace the
terminal cover.
• When removing parts that are to be reused, be sure to
keep them arranged in an orderly manner so that they
may be reinstalled in the proper order and position.
• Whenever you use oil seals, gaskets, packing, O-
rings, locking washers, split pins, self-locking nuts,
and certain other parts as specified, be sure to use
new ones. Also, before installing new gaskets,
packing, etc., be sure to remove any residual material
from the mating surfaces.
• Make sure that all parts used in reassembly are
perfectly clean.
When use of a certain type of lubricant, bond or
sealant is specified, be sure to use the specified type.
"A": Water tight sealant 99000–31250 (SUZUKI
Bond No.1207F)
I2RH01010027-01
• Be sure to use special tools when instructed.
Special tool
(A): 09917–98221
(B): 09916–58210
I5RW0A000002-01
• When disconnecting vacuum hoses, attach a tag
describing the correct installation positions so that the
hoses can be reinstalled correctly.
I2RH01010029-01
I2RH01010030-01
I2RH01010031-01
I2RH01010032-01