Replacing A Front Usb Connector; Preliminary Steps; Removing The Front Usb Connector; Installing The New Front Usb Connector - Fujitsu PRIMERGY TX1320 M4 Upgrade And Maintenance Manual

Front panel

13.2.3 Replacing a front USB connector

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver

13.2.3.1 Preliminary steps

"Locating the defective server" on page 47
Ê
"Shutting down the server" on page 49
Ê
"Disconnecting the power cord" on page 50
Ê
"Getting access to the component" on page 51
Ê

13.2.3.2 Removing the front USB connector

Ê Disconnect the cable end of the front USB connector, see section
"Disconnecting the front USB connector" on page
Ê Remove the front USB connector, see section
connector from FBU tray" on page

13.2.3.3 Installing the new front USB connector

Ê Install the front USB connector, see section
connector" on page
Ê Connect the front USB connector, see section
connector" on page

13.2.3.4 Concluding steps

"Reassembling" on page 57
Ê
"Connecting the power cord" on page 60
Ê
"Switching on the server" on page 63
Ê
270
269.
266.
267.
Upgrade and Maintenance Manual
Hardware: 10 minutes
268.
"Removing the front USB
"Installing the front USB
"Connecting the front USB
TX1320 M4