Protocol-Specific Troubleshooting - Ricoh G157 Service Manual

NETWORK PROBLEMS

4.6.3 PROTOCOL-SPECIFIC TROUBLESHOOTING

®
Windows 95/98/Me and Windows NT
troubleshooting
If you are having trouble printing on a Windows
later Peer-to-Peer network (LPR method), check the following:
1. Make sure that the Ricoh LPR Port driver is correctly installed and configured
according to the Windows
chapters (section 4, Network Printing, in the Network User's Guide).
2. Try to turn the Byte Count on in the Configure port area of the printer driver
properties.
You may find that during the installation of the software, the screen that prompts
you for a Port name is not displayed. This may happen on some Windows
95/98/Me and Windows NT
it appear.
®
Windows 95/98/Me and Windows NT
troubleshooting
If you are having trouble printing on a Windows
later Peer-to-Peer network (NetBIOS), check the following:
1. Make sure that the NetBIOS Port driver is correctly installed and configured
according to the Windows
chapters (section 4, Network Printing, in the Network User's Guide).
You may find that during the installation of the port driver, the screen that
prompts you for a Port name is not displayed. This happens on some
®
Windows 95/98/Me and Windows NT
TAB keys to make it appear.
2. Make sure that the print server is configured to be in the same workgroup or
domain as the rest of your computers. It may take several minutes for the print
server to appear in the network neighborhood.
G157
®
4.0 Peer-to-Peer print (LPR)
®
95/98/Me or Windows NT
®
4.0 computers. Press the ALT and TAB keys to make
®
4.0 Peer-to-Peer print (NetBIOS)
®
95/98/Me or Windows NT
®
4.0 computers. Press the ALT and
4-42
®
95/98/Me, Windows NT
®
4.0 Peer-to-Peer
®
95/98/Me, Windows NT
®
4.0 Peer-to-Peer
®
4.0 or
®
®
4.0 or
SM