Wsw29 (Function Setting 7) - Ricoh G157 Service Manual

WSW29 (Function setting 7)

Selector
No.
Compression threshold level for
voice signals inputted via the
1–3
telephone line in the built-in TAD
operation
Compression threshold level for
voice signals inputted via the
4–6
handset in the built-in TAD
operation
Impedance switching control in
7
pulse dialing
Prompt beep when the memory
8
area for the activity report
becomes full
NOTE: 1) Selectors 1 through 6 are applicable to models equipped with built-in
TADs.
2) Selectors 7 and 8 are applicable only to the European versions.
Selectors 1 through 6: Compression threshold level for voice signals inputted via the
telephone line in the built-in TAD operation
If voice signals inputted via the telephone line are below the level specified by
these selectors, the TAD interprets those received voice signals as no signal,
compressing the recording time.
Selector 8: Prompt beep for activity report
This selector determines whether or not to beep if the memory area for the activity
report becomes full, for prompting you to print out the report. (Printing it out will
clear the memory area.)
SM
Function
No. 1. 2. 3.
No. 4. 5. 6.
5-71
MAINTENANCE MODE
Setting and Specifications
0 0 0: -47.0 dB
0 0 1: -48.5 dB
0 1 0: -50.0 dB
0 1 1: -51.5 dB
1 0 0: -53.0 dB
1 0 1: -54.5 dB
1 1 0: -56.0 dB
1 1 1: OFF
0 0 0: -44.0 dB
0 0 1: -45.5 dB
0 1 0: -47.0 dB
0 1 1: -48.5 dB
1 0 0: -50.0 dB
1 0 1: -51.5 dB
1 1 0: -53.0 dB
1 1 1: OFF
0: OFF 1: ON
0: No 1: Yes
G157