MAINTENANCE MODE
WSW50 (SDAA settings)
Selector
No.
Percentage voltage for
interpreting the external
1, 2
telephone as being hooked up
(based on the network's standard
voltage)
DC mask curve table to be
3
applied when the line is
connected
AC impedance to be applied
4
when the line is connected
Current control to be applied
5, 6
immediately after connection of
the line
AC voltage threshold for
7, 8
detection of ring
NOTE: WSW50 is applicable to models equipped with SDAA circuits.
WSW51 (Function setting 16)
Selector
No.
Output of communications error
1
report when transmission
verification report is disabled
2–8
Not used.
WSW52 Selector
Selector
No.
1–8
Not used.
G157
Function
Function
Function
5-88
Setting and Specifications
(Not used.)
(Not used.)
(Not used.)
(Not used.)
(Not used.)
Setting and Specifications
0: Enable
1: Disable
Setting and Specifications
SM