Wsw12 (Signal Detection Condition Setting) - Ricoh G157 Service Manual

MAINTENANCE MODE

WSW12 (Signal detection condition setting)

Selector
No.
Min. detection period required for
1, 2 interpreting incoming calling
signal (CI) as OFF
Max. detection period for
3, 4 incoming calling signal (CI) being
OFF
Min. detection period required for
5, 6 acknowledging incoming calling
signal (CI) as ON
7 Line connection timing
8 Not used.
Selectors 1 and2: Min. detection period required for interpreting incoming calling
signal (CI) as OFF
Selectors 3 and 4: Max. detection period for incoming calling signal (CI) being OFF
If the machine detects the OFF state of a CI signal for the period greater than the
value set by selectors 1 and 2 and less than the value set by selectors 3 and 4, it
interprets the CI signal as OFF.
Selectors 5 and 6: Min. detection period required for acknowledging incoming calling
signal (CI) as ON
These selectors set the period required to make the machine acknowledge itself to
be called. That is, if the machine continuously detects a CI signal with the
frequency set by selectors 1 through 4 on WSW14 during the period set by these
selectors 5 and 6, then it acknowledges the call.
G157
Function
5-54
Setting and Specifications
No. 1. 2.
0 0: 1500 ms
0 1: 500 ms
1 0: 700 ms
1 1: 900 ms
No. 3. 4.
0 0: 6 sec.
0 1: 7 sec.
1 0: 9 sec.
1 1: 11 sec.
No. 5. 6.
0 0: 800 ms (1000 ms*)
0 1: 200 ms
1 0: 250 ms
1 1: 150 ms
100 ms*: Chinese model
(Not used.)
SM