Wsw10 (Protocol Definition 2) - Ricoh G157 Service Manual

MAINTENANCE MODE

WSW10 (Protocol definition 2)

Selector
No.
1 Not used.
Time length from transmission of
2
the last dial digit to CML ON
Time length from CML ON to
3
CNG transmission
Time length from CML ON to
4 CED transmission (except for
facsimile-to-telephone switching)
5, 6 No. of training retries
5 T5 timer
6 T1 timer
7
Encoding system
(Compression)
8
Selector 2: Time length from transmission of the last dial digit to CML ON
This selector sets the time length from when the machine transmits the last dial
digit until the CML relay comes on.
Selector 3: Time length from CML ON to CNG transmission
This selector sets the time length until the machine transmits a CNG after it turns
on the CML relay.
Selector 4: Time length from CML ON to CED transmission
This selector sets the time length until the machine transmits a CED after it turns
on the CML relay. This setting does not apply to switching between facsimile and
telephone.
Selectors 5 and 6: No. of training retries
These selectors set the number of training retries to be repeated before automatic
fallback.
Selectors 7 and 8: Encoding system (Compression)
This selector determines whether or not to allow the use of the MR/MMR coding
system.
G157
Function
MR
MMR
5-52
Setting and Specifications
0: 100 ms
0: 2 sec.
0: 0.5 sec.
No. 5. 6.
0 0: 1 time
0 1: 2 times
1 0: 3 times
1 1: 4 times
0: 300 sec.
0: 35 sec.
0: Allowed
0: Allowed
1: 50 ms
1: 4 sec.
1: 2 sec.
1: 60 sec.
1: 40 sec.
1: Not allowed
1: Not allowed
SM