Service Mode Functions - Ricoh G157 Service Manual

5.1.2 SERVICE MODE FUNCTIONS

This device has service mode functions as shown below.
Main Mode
TEST PRINT
NEXT CARE
INFORMATION
CASSETTE TYPE
TOTAL PAGE
EACH IMAGE
CLEAR CARE
MEDIA MANAGE
EXTENDED MEDIA
FACTORY MODE
SM
Code
No.
31
Prints the Grid Pattern in B/W or two-color (RGB) mode and
the Stripe Pattern in full color mode.
32 Displays the number of the developments or prints for each
PM part.
33 Selects the cassette type (North America, Europe, Japan).
34 Displays the number of total prints.
35 Displays the number of developments for each color.
36 Clears the number of the developments or prints for each
PM part.
37 Ignores the signal from the OHP sensor.
38 Sets the paper type.
43 MARGIN ADJUST
Adjusts the top margin and left margin on the printout.
44 LIFE PERIOD SET
Sets the PM parts life. DFU
45 NVRAM TUNE UP
Makes fine adjustments to the engine settings.
46 NVRAM INITIAL
Initializes all the data in the NVRAM on the BCU.
47 TOTAL PAGE SET
Inputs the total number of prints in the NVRAM, after the
NVRAM was reset.
48 EACH IMAGE SET
Clears the number of total prints for each color in the
NVRAM.
49 NEXT LIFE SET
Sets the replacement timing for the PM parts.
5-3
SERVICE MODE MENU
Sub Mode/Description
G157