Wsw37 (Function Setting 15) - Ricoh G157 Service Manual

WSW37 (Function setting 15)

Selector
No.
Printout of the stored image data
1 of an unsent document onto an
error report
Erasure of the stored image data
of an unsent document at the
2
time of the subsequent in-
memory message transmission
3–8 Not used.
Selector 1: Printout of the stored image data of an unsent document onto an error
report
This selector determines whether or not to print out the 1st-page image data of a
document onto the error report if the document image data stored in the temporary
memory cannot be transmitted normally.
Selector 2: Erasure of the stored image data of an unsent document at the time of the
subsequent in-memory message transmission
If in-memory message transmission fails repeatedly when selector 1 is set to "1",
the temporary memory will be occupied with image data. Setting selector 2 to "1"
will automatically erase the stored 1st-page image data of an unsent document at
the time of the subsequent in-memory message transmission only when recording
paper or toner runs out.
SM
Function
5-79
MAINTENANCE MODE
Setting and Specifications
0: No 1: Yes
0: No 1: Yes
G157