Firmware Switches; Wsw01 (Dial Pulse Setting) - Ricoh G157 Service Manual

MAINTENANCE MODE

5.2.4 FIRMWARE SWITCHES

WSW01 (Dial pulse setting)

Selector
No.
1, 2 Dial pulse generation mode
3, 4 Break time length in pulse dialing
5, 6 Inter-digit pause
Switching between pulse (DP)
7 and tone (PB) dialing by the
function switch
Default dialing mode, pulse (DP)
8
or tone (PB) dialing
Selectors 1 and 2: Dial pulse generation mode
These selectors set the number of pulses to be generated in pulse dialing.
N: Dialing "N" generates "N" pulses. (Dialing "0" generates 10 pulses.)
N + 1: Dialing "N" generates "N + 1" pulses.
10 - N: Dialing "N" generates "10 - N" pulses.
Selectors 3 and 4: Break time length in pulse dialing
These selectors set the break time [A] length in pulse dialing.
(Example: If "1," "2," and "3" are dialed when N is set by selectors 1 and 2.)
[A]
"1"
G157
Function
"2"
5-40
Setting and Specifications
No. 1. 2.
0 0: N
0 1: N+1
1 0: 10-N
1 1: N
No. 3. 4.
0 0: 60 ms
0 1: 67 ms
1 0: 40 ms (for 16 PPS)
1 1: 64 ms (at 106 ms
interval)
No. 5. 6.
0 0: 800 ms
0 1: 850 ms
1 0: 950 ms
1 1: 600 ms
0: Yes 1: No
0: PB 1: DP
"3"
G157S501.WMF
SM